Refinery table (9)

I took 10mm of the legs and I think the result is much better, but I am going to keep the space under them open, so it is possible to draw LOS or maybe I am going to put something under there later.
I took some old tubing and used it to make some pipes that will connect to some kind underground pipe system.

As for the tanks them self there are going to be some strips of plastic card running over them for detail and some kind of hatch at the top so it is possible to look inside.

Refinery table(8)

With holidays upon us I had some more the time to fiddle with my refinery table(new title... I have upgrade it from a few pieces of terrain to a whole table)

But being shot of some supplies for casting I have but the compound on hold, till I can get my hands on some more, and started on some smaller pieces for the table.

so here is a small teaser on the new pieces.
First up after seeing the picture I think it is to tall, so I am going to cut it down 10mm or so. But the big question is should it be just the 2 supports, so it is possible to draw LOS underneath the tank, or should I make it like one big block of concrete so the whole piece is blocking terrain?

BTW as some might make from the background I have to more of the small cans, so there is going to be 3 of these pieces for now.

Futuristic cargo container

Well I found out that making only one side of the container, might not be the write way to go. So I made half of it and planed to cast the rest, but I think i made a minor miscalculation seeing that it is like 4 times higher then a guardsman , so I am gonna make a smaller one, but at least the principal is working.

Futuristic cargo container

Well it has been some time since my last post, but I am still alive and scratching.

My latest project is in the more small terrain pieces(fx something to place between all your cool buildings) And today's model is a futuristic cargo container, I got inspired to do the other day, seeing what I believe is some kind of generator.

So I made a model in sketch up to get an idea of how I am going to build it.












(Space marine only for comparison and not included)















I am planning to one of the sides and the cast it in resin since the container is octagonal it should work fine, and save me from a lot of work. Plus it will give me the opportunity to replicate the model, to make all kinds of cool pieces.