Makeshift hangar

Wow it has been a long time since i posted anything in my blog, but here goes.

I have been working on a new project today, and just wanted to show it since it is late. More text will follow later.

 

Well here it is. C & C welcome.

Back to the workshop.

Fighta Bommer (4)

Hmm when you set out to do something only do find out you are out of plastic card, you get very sad :( and end up buying wired games like napoleon total war and play that all the time and forget to build any fighta bommer :)

But I finally got my mojo back did some work on the bommer, since I could not work on the body, I did some work on the engines, and I an pretty pleased with the result.

The flaps are going to be folded down to the tube in the center, the engines were actually simple to make, but time consuming.

I have also made some bombs, but I forgot to take any pictures, so you are going to see them next time I get around to take some pictures.

Fighta Bommer (3)

Last Saturday we had an apocalypse battle over at my local gaming club, and thought I did not play my self, I went over there to work on the fighta bommer while watching the game. And I did get a lot of work do unfortunately I forgot my and camera so I only took a few shoots with my cell phone.

And here is the result of the days work, I am very pleased and surprised with the result of the wings.

 

Unless I run out of plastic card I should have the sheeting done today or tomorrow at the latest. 

Fighta Bommer (2)

I did some more work Da Bommer this time I started on the wings.

We ad to strap a grot to da biggst pole we could find in da shop to give you tis high photo.

 

Surprisingly he did manage to take tis fine photo on his way crasing to da earth after

some of da boys thought it was funny to let go af da pole...

Ha ha ha ha ha

dad was funny

I forgot to take some shots of my ingenious wing fixing thingi (in own words), but will take some later when I get back to the workshop.

But I almost finished the rips for the left wing. Holy s*** that was tedious work, I would like to point out that someone, not mention any names here, thought it would look cool if the wing where at an angle, so all the ribs needed to be different sizes argh.... Well I did get it done and here is a shot of the power of the rainbow clamps.

Also I am not sure about the bottom part of the plane, so I think I am going to scrap that and go for some wing mounted jet engines, but more on that later.

--
Well back to the workshop
C&C is welcome

Fighta Bommer (1)

Because when it comes to building stuff I sometimes have the attention span of a gopher ;P

You know sometimes you just have to do something else, I had one of those moments last Saturday. We have been playing a lot of apocalypse late in my local gaming club. I have always had to idea to apocalypse that it is not just a normal 40k game with more points, of course this might be solved be using special missions or narrative storytelling, but I think the way is the introduce models and armies not seen in normal games, and I don't just mean three Baneblades. It could be a funny model or some small unit that gives the over all feel to the army, and army springs to mind when it comes to special units.... DA ORKS

So yes I have started an Ork Apocalypse army Da ROAF (Da r-someting Ork Air force) mainly because this have the potential to being a fun army to play in a apocalypse game with out having 5000p+ army.

Of course I have started with the essentials Da mighty Fighta Bommer.
The main problem with construction the hull is getting the shape and structural integrity, and what I have found is a old and time tested method for hull construction, ribs and more ribs, this methode have been used for millennia for ship building and it works fine for ork aircraft building.

My plan is to construct the hull with ribs and cote them with thin .5 mm plasticcard wich is easier to bend over the curves, and the late orkify the plane with slap on armor plates and repairs.

I have going to use the same approach on the wings, with one or two beams running down the middle for support and a way to attach the wing to the hull.

Of course no fighta bommer is compleet with out an rear turret.

This simple turret is constructed from .75 mm strips of plasticcard and some styrene rods in different sizes. And of course a little vision slot on the top so the gunner can see what he is shooting at.

Manticore (5)

I haven't had so much time this past few days to do any modelling, but I did get some done today, and here is the result.

I was thinking about raising the launcher a bit, so I made a Hydraulic piston to raise and lower the launcher.


The only problem with this is that now I have to do something with the interior so it does not just look like an empty shell.

Manticore (4)

Did some more work tonight, have been working on an exhaust/vent system for the rear, so the smoke from the rockets can escape.

I am not entirely happy with the framing so I am properly going to redo it to morrow, but for now it will serve as a model for what I am aiming for.

---

Just thought I would show you my birthday present and new favorite tool
THE CHOPPER

With this baby it is easy to cut several strip or profiles to the same length or cutting angels. I simply loves this tool. 

Manticore (3)

I had the day of and when i finally got around to getting out of bed, got some more work done on the Manticore.  

Among things to mention is the hinge on the back so the tubes can be lowered into the hull, and the hatch in the front so it is possible to get the inside :P i have also been filling gaps and sanding although I am not entirely done with this. I have also test fitted the stuff at the front not sure if I'll be going with that in the end.

I still need do a lot of riveting, though I had misplace min punch pliers and was out of rivets, but it has resurfaced and I am now ready to commence riveting.

Sadly my camera ran out of batteries and my cell phone does not have a macro function so I will take some close-ups when I get some fresh batteries.

A bit in doubt about what to do with the big area on top of the tubes, it is begging for an aquilla or something like that, but dunno weather to make a large one filling the whole area or just a small one at the top.

Manticore (2)

Did not get as much work done on the Manticore this weekend as I had hope for, but I did settle on the final design, well sort of.

 

 

--
Well back to the workshop
C&C is welcome

Manticore (1)

Well I have actually puled my self together and start working on a project and take some pictures of it. Some how I go the crazy idea of entering a local competition where you have to build and paint an 1700p army in 12 weeks, seeing that last time it tool me close to 3 years to get it speed painted (red 3 colours and no highlights).

So I have decided to make an Imperiel Guard army and of course I do not want to make it to easy for my self :P so it is going to be a heavily converted, atleast on the tank side of it so I got my job cut of the next couple of months.

Witch brings us back to the project on hand a manticore tank, and since I am not going to spend a lot of forgewold models and don't like the look of the stock manticore, I am going to scratch one from a chimera.

So here are the rockets I am going to use as Storm Eagle Rockets.
I am going for look more in the line of the American MLRS I heavily inspired by Changeling Chimera 438 over at The AmmoBunker. Well any how here are the beginning of the launch tubes.

--
Well back to the workshop
C&C is welcome

Dragons teath

Well with my exams finally over I can turn my attention to models again :P and I have a lot of ideas whirling around my head and I just have to get them out, so here is the first pieces.

I just need to add some texture and then they are ready to be moulded, yes moulded cause the my main idea was the dragon teeth in particular, but fast an easy terrain for casting, and since these pieces can easily be cast using a open mould they are ideal for the project. 

And now for something completely different...

You know sometimes you just an idea stuck in your head and just feel like you have to do make it. Well that is just what happened for me tonight, and below you can see the fruit of my detour from my current terrain project.

An imperial guard weapons locker.
Going to make some cabinets in the bottom section, and a few more details maybe some grenades or something similarly small.

And they say surfing the web for to long at a time can be dangerous :P

Refinery table ( 10)

Well this is pretty much how the tanks are going to look like, properly going to add some huge danger explosives signs on the side of the tanks, and of course rivets, rivets and more rivets.
So apart some green stuff filling and the above mentioned details the first tanks is complete.

I don't know weather or not I am happy with the look of the valve handle, but it gives a little more something to the plate, so I think I will stick with it.

Refinery table (9)

I took 10mm of the legs and I think the result is much better, but I am going to keep the space under them open, so it is possible to draw LOS or maybe I am going to put something under there later.
I took some old tubing and used it to make some pipes that will connect to some kind underground pipe system.

As for the tanks them self there are going to be some strips of plastic card running over them for detail and some kind of hatch at the top so it is possible to look inside.

Refinery table(8)

With holidays upon us I had some more the time to fiddle with my refinery table(new title... I have upgrade it from a few pieces of terrain to a whole table)

But being shot of some supplies for casting I have but the compound on hold, till I can get my hands on some more, and started on some smaller pieces for the table.

so here is a small teaser on the new pieces.
First up after seeing the picture I think it is to tall, so I am going to cut it down 10mm or so. But the big question is should it be just the 2 supports, so it is possible to draw LOS underneath the tank, or should I make it like one big block of concrete so the whole piece is blocking terrain?

BTW as some might make from the background I have to more of the small cans, so there is going to be 3 of these pieces for now.

Refinery table ( 7)

The first half of the moulds are done, and have been prep for the other half.This is the first time I have used ordinary clay to make the "fake" half of the mould, used to use modelling clay(something like play-do), stopped using it since I experienced some problems with the silicone not hardening properly. And I must say the clay is great for the purpose, it is easy to remove from the silicon after since the clay is dissolved in water.



also most made a great mistake, nearly forgot to use the release agent on the mould, without it the silicone would fuse together and you would end up with a big lump of silicone, with some plastic in the middle.

Refinery table ( 6)

An other update tonight be for I head to bed.

I Have finished the bends and made them ready for moulding.
I used this opportunity to make an other mould, since it is not that more work to tow moulds, when you are making one. And as you can probably guess from the back ground, I am going to make a mould of some oil drums, since I am pretty sure I am going to use a lot of them in this project.

And here is the silicone rubber I am using, it is from Slymasta and is the 370 grade rubber. It is easy to work with a since it is really flexible allows for undercuts making it perfect for model replication. The keen observer might notice that there now are 3 mould, that is be cause I am not that good a estimating the amount of silicone need to make the mould, so I quickly found some other stuff I could use a mould of. It is going to be a 1 sided mould of some drums, to be used for sticking out of the ground ect.

And ps. don't say modelling isn't dangerous.
I cut my self trying to separate a drum from a old model, must have used a hole bottle of glue attaching it in the first place.

PPS.
having half you finger fixed is kinda crippling when modelling and writing.